AQW210HL |
RFQ for AQW210HL Required Field |
 |
| Technical/Catalog Information | AQW210HL |
| Vendor | Panasonic Electric Works |
| Category | Relays |
| Mounting Type | Through Hole |
| Termination Style | PC Pin |
| Package / Case | 8-DIP |
| Circuit | DPST (2 Form A) |
| Load Current | 120mA |
| Voltage - Input | 1.25VDC |
| Voltage - Load | 0 ~ 350V |
| Output Type | AC, DC |
| On-State Resistance | 25 Ohm |
| Lead Free Status | Lead Free |
| RoHS Status | RoHS Compliant |
| Other Names | AQW210HL AQW210HL |
| Product | Manufacturers | Pack | D/C |
| AQW210HL | - | DIP-8 | 05+ |
Typical Application |
Features |
| • Telephone equipment• Modem | 1. Current Limit Function To control an over current from flowing, the current limit function has been realized. It keeps an output current at a constant value when the current reaches a specified current limit value.2. Enhancing the capability of surge resistance between output terminalsThe current limit function controls the ON time surge current to enhance the capability of surge resistance between output terminals.3. Reinforced insulation 5,000 V type More than 0.4 mm internal insulation distance between inputs and outputs. Conforms to EN41003, EN60950 (reinforced insulation).4. Compact 8-pin DIP size The device comes in a compact (W)6.4×(L)9.86× (H) 3.2mm (W).252× (L).388×(H).126inch, 8-pin DIP size (through hole terminal type)5. Applicable for 2 Form A use as well as two independent 1 Form A use.6. Controls low-level analog signals7. High sensitivity, high speed response. Can control a maximum 0.12 A load current with a 5 mA input current. Fast operation speed of 0.5ms (typ.)8. Low-level off state leakage current |
| Item |
Symbol |
AQW210HL(A) |
Remarks | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Input | LED forward current |
IF |
50 mA |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| LED reverse voltage |
VR |
3 V |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Peak forward current |
IFP |
1 A |
f = 100 Hz, Duty factor = 0.1% | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Power dissipation |
Pin |
75 mW |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Output | Load voltage (peak AC) |
VL |
350 V |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Continuous load current |
IL |
0.1 A (0.12 A) |
( ): in case of using only 1 channel Peak AC, DC | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Power dissipation |
Pout |
800mW |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Total power dissipation |
PT |
850mW |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| I/O isolation voltage |
Viso |
<
SupplierPost a Buying LeadPDF / DatasheetRelated PDFRelated Models
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
